@article{280, abstract = {Flowers have a species-specific functional life span that determines the time window in which pollination, fertilization and seed set can occur. The stigma tissue plays a key role in flower receptivity by intercepting pollen and initiating pollen tube growth toward the ovary. In this article, we show that a developmentally controlled cell death programme terminates the functional life span of stigma cells in Arabidopsis. We identified the leaf senescence regulator ORESARA1 (also known as ANAC092) and the previously uncharacterized KIRA1 (also known as ANAC074) as partially redundant transcription factors that modulate stigma longevity by controlling the expression of programmed cell death-associated genes. KIRA1 expression is sufficient to induce cell death and terminate floral receptivity, whereas lack of both KIRA1 and ORESARA1 substantially increases stigma life span. Surprisingly, the extension of stigma longevity is accompanied by only a moderate extension of flower receptivity, suggesting that additional processes participate in the control of the flower's receptive life span.}, author = {Gao, Zhen and Daneva, Anna and Salanenka, Yuliya and Van Durme, Matthias and Huysmans, Marlies and Lin, Zongcheng and De Winter, Freya and Vanneste, Steffen and Karimi, Mansour and Van De Velde, Jan and Vandepoele, Klaas and Van De Walle, Davy and Dewettinck, Koen and Lambrecht, Bart and Nowack, Moritz}, journal = {Nature Plants}, number = {6}, pages = {365 -- 375}, publisher = {Nature Publishing Group}, title = {{KIRA1 and ORESARA1 terminate flower receptivity by promoting cell death in the stigma of Arabidopsis}}, doi = {10.1038/s41477-018-0160-7}, volume = {4}, year = {2018}, } @article{503, abstract = {Buffers are essential for diluting bacterial cultures for flow cytometry analysis in order to study bacterial physiology and gene expression parameters based on fluorescence signals. Using a variety of constitutively expressed fluorescent proteins in Escherichia coli K-12 strain MG1655, we found strong artifactual changes in fluorescence levels after dilution into the commonly used flow cytometry buffer phosphate-buffered saline (PBS) and two other buffer solutions, Tris-HCl and M9 salts. These changes appeared very rapidly after dilution, and were linked to increased membrane permeability and loss in cell viability. We observed buffer-related effects in several different E. coli strains, K-12, C and W, but not E. coli B, which can be partially explained by differences in lipopolysaccharide (LPS) and outer membrane composition. Supplementing the buffers with divalent cations responsible for outer membrane stability, Mg2+ and Ca2+, preserved fluorescence signals, membrane integrity and viability of E. coli. Thus, stabilizing the bacterial outer membrane is essential for precise and unbiased measurements of fluorescence parameters using flow cytometry.}, author = {Tomasek, Kathrin and Bergmiller, Tobias and Guet, Calin C}, journal = {Journal of Biotechnology}, pages = {40 -- 52}, publisher = {Elsevier}, title = {{Lack of cations in flow cytometry buffers affect fluorescence signals by reducing membrane stability and viability of Escherichia coli strains}}, doi = {10.1016/j.jbiotec.2018.01.008}, volume = {268}, year = {2018}, } @article{82, abstract = {In experimental cultures, when bacteria are mixed with lytic (virulent) bacteriophage, bacterial cells resistant to the phage commonly emerge and become the dominant population of bacteria. Following the ascent of resistant mutants, the densities of bacteria in these simple communities become limited by resources rather than the phage. Despite the evolution of resistant hosts, upon which the phage cannot replicate, the lytic phage population is most commonly maintained in an apparently stable state with the resistant bacteria. Several mechanisms have been put forward to account for this result. Here we report the results of population dynamic/evolution experiments with a virulent mutant of phage Lambda, λVIR, and Escherichia coli in serial transfer cultures. We show that, following the ascent of λVIR-resistant bacteria, λVIRis maintained in the majority of cases in maltose-limited minimal media and in all cases in nutrient-rich broth. Using mathematical models and experiments, we show that the dominant mechanism responsible for maintenance of λVIRin these resource-limited populations dominated by resistant E. coli is a high rate of either phenotypic or genetic transition from resistance to susceptibility—a hitherto undemonstrated mechanism we term "leaky resistance." We discuss the implications of leaky resistance to our understanding of the conditions for the maintenance of phage in populations of bacteria—their “existence conditions.”.}, author = {Chaudhry, Waqas and Pleska, Maros and Shah, Nilang and Weiss, Howard and Mccall, Ingrid and Meyer, Justin and Gupta, Animesh and Guet, Calin C and Levin, Bruce}, journal = {PLoS Biology}, number = {8}, publisher = {Public Library of Science}, title = {{Leaky resistance and the conditions for the existence of lytic bacteriophage}}, doi = {10.1371/journal.pbio.2005971}, volume = {16}, year = {2018}, } @article{4, abstract = {We present a data-driven technique to instantly predict how fluid flows around various three-dimensional objects. Such simulation is useful for computational fabrication and engineering, but is usually computationally expensive since it requires solving the Navier-Stokes equation for many time steps. To accelerate the process, we propose a machine learning framework which predicts aerodynamic forces and velocity and pressure fields given a threedimensional shape input. Handling detailed free-form three-dimensional shapes in a data-driven framework is challenging because machine learning approaches usually require a consistent parametrization of input and output. We present a novel PolyCube maps-based parametrization that can be computed for three-dimensional shapes at interactive rates. This allows us to efficiently learn the nonlinear response of the flow using a Gaussian process regression. We demonstrate the effectiveness of our approach for the interactive design and optimization of a car body.}, author = {Umetani, Nobuyuki and Bickel, Bernd}, journal = {ACM Trans. Graph.}, number = {4}, publisher = {ACM}, title = {{Learning three-dimensional flow for interactive aerodynamic design}}, doi = {10.1145/3197517.3201325}, volume = {37}, year = {2018}, } @inproceedings{183, abstract = {Fault-localization is considered to be a very tedious and time-consuming activity in the design of complex Cyber-Physical Systems (CPS). This laborious task essentially requires expert knowledge of the system in order to discover the cause of the fault. In this context, we propose a new procedure that AIDS designers in debugging Simulink/Stateflow hybrid system models, guided by Signal Temporal Logic (STL) specifications. The proposed method relies on three main ingredients: (1) a monitoring and a trace diagnostics procedure that checks whether a tested behavior satisfies or violates an STL specification, localizes time segments and interfaces variables contributing to the property violations; (2) a slicing procedure that maps these observable behavior segments to the internal states and transitions of the Simulink model; and (3) a spectrum-based fault-localization method that combines the previous analysis from multiple tests to identify the internal states and/or transitions that are the most likely to explain the fault. We demonstrate the applicability of our approach on two Simulink models from the automotive and the avionics domain.}, author = {Bartocci, Ezio and Ferrere, Thomas and Manjunath, Niveditha and Nickovic, Dejan}, location = {Porto, Portugal}, pages = {197 -- 206}, publisher = {Association for Computing Machinery, Inc}, title = {{Localizing faults in simulink/stateflow models with STL}}, doi = {10.1145/3178126.3178131}, year = {2018}, } @article{566, abstract = {We consider large random matrices X with centered, independent entries which have comparable but not necessarily identical variances. Girko's circular law asserts that the spectrum is supported in a disk and in case of identical variances, the limiting density is uniform. In this special case, the local circular law by Bourgade et. al. [11,12] shows that the empirical density converges even locally on scales slightly above the typical eigenvalue spacing. In the general case, the limiting density is typically inhomogeneous and it is obtained via solving a system of deterministic equations. Our main result is the local inhomogeneous circular law in the bulk spectrum on the optimal scale for a general variance profile of the entries of X. }, author = {Alt, Johannes and Erdös, László and Krüger, Torben H}, journal = {Annals Applied Probability }, number = {1}, pages = {148--203}, publisher = {Institute of Mathematical Statistics}, title = {{Local inhomogeneous circular law}}, doi = {10.1214/17-AAP1302}, volume = {28}, year = {2018}, } @article{106, abstract = {The goal of this article is to introduce the reader to the theory of intrinsic geometry of convex surfaces. We illustrate the power of the tools by proving a theorem on convex surfaces containing an arbitrarily long closed simple geodesic. Let us remind ourselves that a curve in a surface is called geodesic if every sufficiently short arc of the curve is length minimizing; if, in addition, it has no self-intersections, we call it simple geodesic. A tetrahedron with equal opposite edges is called isosceles. The axiomatic method of Alexandrov geometry allows us to work with the metrics of convex surfaces directly, without approximating it first by a smooth or polyhedral metric. Such approximations destroy the closed geodesics on the surface; therefore it is difficult (if at all possible) to apply approximations in the proof of our theorem. On the other hand, a proof in the smooth or polyhedral case usually admits a translation into Alexandrov’s language; such translation makes the result more general. In fact, our proof resembles a translation of the proof given by Protasov. Note that the main theorem implies in particular that a smooth convex surface does not have arbitrarily long simple closed geodesics. However we do not know a proof of this corollary that is essentially simpler than the one presented below.}, author = {Akopyan, Arseniy and Petrunin, Anton}, journal = {Mathematical Intelligencer}, number = {3}, pages = {26 -- 31}, publisher = {Springer}, title = {{Long geodesics on convex surfaces}}, doi = {10.1007/s00283-018-9795-5}, volume = {40}, year = {2018}, } @misc{9810, author = {Chaudhry, Waqas and Pleska, Maros and Shah, Nilang and Weiss, Howard and Mccall, Ingrid and Meyer, Justin and Gupta, Animesh and Guet, Calin C and Levin, Bruce}, publisher = {Public Library of Science}, title = {{Numerical data used in figures}}, doi = {10.1371/journal.pbio.2005971.s008}, year = {2018}, } @article{275, abstract = {Lymphatic endothelial cells (LECs) release extracellular chemokines to guide the migration of dendritic cells. In this study, we report that LECs also release basolateral exosome-rich endothelial vesicles (EEVs) that are secreted in greater numbers in the presence of inflammatory cytokines and accumulate in the perivascular stroma of small lymphatic vessels in human chronic inflammatory diseases. Proteomic analyses of EEV fractions identified > 1,700 cargo proteins and revealed a dominant motility-promoting protein signature. In vitro and ex vivo EEV fractions augmented cellular protrusion formation in a CX3CL1/fractalkine-dependent fashion and enhanced the directional migratory response of human dendritic cells along guidance cues. We conclude that perilymphatic LEC exosomes enhance exploratory behavior and thus promote directional migration of CX3CR1-expressing cells in complex tissue environments.}, author = {Brown, Markus and Johnson, Louise and Leone, Dario and Májek, Peter and Vaahtomeri, Kari and Senfter, Daniel and Bukosza, Nora and Schachner, Helga and Asfour, Gabriele and Langer, Brigitte and Hauschild, Robert and Parapatics, Katja and Hong, Young and Bennett, Keiryn and Kain, Renate and Detmar, Michael and Sixt, Michael K and Jackson, David and Kerjaschki, Dontscho}, journal = {Journal of Cell Biology}, number = {6}, pages = {2205 -- 2221}, publisher = {Rockefeller University Press}, title = {{Lymphatic exosomes promote dendritic cell migration along guidance cues}}, doi = {10.1083/jcb.201612051}, volume = {217}, year = {2018}, } @article{158, abstract = {The angiosperm seed is composed of three genetically distinct tissues: the diploid embryo that originates from the fertilized egg cell, the triploid endosperm that is produced from the fertilized central cell, and the maternal sporophytic integuments that develop into the seed coat1. At the onset of embryo development in Arabidopsis thaliana, the zygote divides asymmetrically, producing a small apical embryonic cell and a larger basal cell that connects the embryo to the maternal tissue2. The coordinated and synchronous development of the embryo and the surrounding integuments, and the alignment of their growth axes, suggest communication between maternal tissues and the embryo. In contrast to animals, however, where a network of maternal factors that direct embryo patterning have been identified3,4, only a few maternal mutations have been described to affect embryo development in plants5–7. Early embryo patterning in Arabidopsis requires accumulation of the phytohormone auxin in the apical cell by directed transport from the suspensor8–10. However, the origin of this auxin has remained obscure. Here we investigate the source of auxin for early embryogenesis and provide evidence that the mother plant coordinates seed development by supplying auxin to the early embryo from the integuments of the ovule. We show that auxin response increases in ovules after fertilization, due to upregulated auxin biosynthesis in the integuments, and this maternally produced auxin is required for correct embryo development.}, author = {Robert, Hélène and Park, Chulmin and Gutièrrez, Carla and Wójcikowska, Barbara and Pěnčík, Aleš and Novák, Ondřej and Chen, Junyi and Grunewald, Wim and Dresselhaus, Thomas and Friml, Jirí and Laux, Thomas}, journal = {Nature Plants}, number = {8}, pages = {548 -- 553}, publisher = {Nature Publishing Group}, title = {{Maternal auxin supply contributes to early embryo patterning in Arabidopsis}}, doi = {10.1038/s41477-018-0204-z}, volume = {4}, year = {2018}, } @article{152, abstract = {Complex I has an essential role in ATP production by coupling electron transfer from NADH to quinone with translocation of protons across the inner mitochondrial membrane. Isolated complex I deficiency is a frequent cause of mitochondrial inherited diseases. Complex I has also been implicated in cancer, ageing, and neurodegenerative conditions. Until recently, the understanding of complex I deficiency on the molecular level was limited due to the lack of high-resolution structures of the enzyme. However, due to developments in single particle cryo-electron microscopy (cryo-EM), recent studies have reported nearly atomic resolution maps and models of mitochondrial complex I. These structures significantly add to our understanding of complex I mechanism and assembly. The disease-causing mutations are discussed here in their structural context.}, author = {Fiedorczuk, Karol and Sazanov, Leonid A}, journal = {Trends in Cell Biology}, number = {10}, pages = {835 -- 867}, publisher = {Elsevier}, title = {{Mammalian mitochondrial complex I structure and disease causing mutations}}, doi = {10.1016/j.tcb.2018.06.006}, volume = {28}, year = {2018}, } @inproceedings{310, abstract = {A model of computation that is widely used in the formal analysis of reactive systems is symbolic algorithms. In this model the access to the input graph is restricted to consist of symbolic operations, which are expensive in comparison to the standard RAM operations. We give lower bounds on the number of symbolic operations for basic graph problems such as the computation of the strongly connected components and of the approximate diameter as well as for fundamental problems in model checking such as safety, liveness, and coliveness. Our lower bounds are linear in the number of vertices of the graph, even for constant-diameter graphs. For none of these problems lower bounds on the number of symbolic operations were known before. The lower bounds show an interesting separation of these problems from the reachability problem, which can be solved with O(D) symbolic operations, where D is the diameter of the graph. Additionally we present an approximation algorithm for the graph diameter which requires Õ(n/D) symbolic steps to achieve a (1 +ϵ)-approximation for any constant > 0. This compares to O(n/D) symbolic steps for the (naive) exact algorithm and O(D) symbolic steps for a 2-approximation. Finally we also give a refined analysis of the strongly connected components algorithms of [15], showing that it uses an optimal number of symbolic steps that is proportional to the sum of the diameters of the strongly connected components.}, author = {Chatterjee, Krishnendu and Dvorák, Wolfgang and Henzinger, Monika H and Loitzenbauer, Veronika}, location = {New Orleans, Louisiana, United States}, pages = {2341 -- 2356}, publisher = {ACM}, title = {{Lower bounds for symbolic computation on graphs: Strongly connected components, liveness, safety, and diameter}}, doi = {10.1137/1.9781611975031.151}, year = {2018}, } @article{436, abstract = {There has been significant interest recently in using complex quantum systems to create effective nonreciprocal dynamics. Proposals have been put forward for the realization of artificial magnetic fields for photons and phonons; experimental progress is fast making these proposals a reality. Much work has concentrated on the use of such systems for controlling the flow of signals, e.g., to create isolators or directional amplifiers for optical signals. In this Letter, we build on this work but move in a different direction. We develop the theory of and discuss a potential realization for the controllable flow of thermal noise in quantum systems. We demonstrate theoretically that the unidirectional flow of thermal noise is possible within quantum cascaded systems. Viewing an optomechanical platform as a cascaded system we show here that one can ultimately control the direction of the flow of thermal noise. By appropriately engineering the mechanical resonator, which acts as an artificial reservoir, the flow of thermal noise can be constrained to a desired direction, yielding a thermal rectifier. The proposed quantum thermal noise rectifier could potentially be used to develop devices such as a thermal modulator, a thermal router, and a thermal amplifier for nanoelectronic devices and superconducting circuits.}, author = {Barzanjeh, Shabir and Aquilina, Matteo and Xuereb, André}, journal = {Physical Review Letters}, number = {6}, publisher = {American Physical Society}, title = {{Manipulating the flow of thermal noise in quantum devices}}, doi = {10.1103/PhysRevLett.120.060601}, volume = {120}, year = {2018}, } @article{5858, abstract = {Spatial patterns are ubiquitous on the subcellular, cellular and tissue level, and can be studied using imaging techniques such as light and fluorescence microscopy. Imaging data provide quantitative information about biological systems; however, mechanisms causing spatial patterning often remain elusive. In recent years, spatio-temporal mathematical modelling has helped to overcome this problem. Yet, outliers and structured noise limit modelling of whole imaging data, and models often consider spatial summary statistics. Here, we introduce an integrated data-driven modelling approach that can cope with measurement artefacts and whole imaging data. Our approach combines mechanistic models of the biological processes with robust statistical models of the measurement process. The parameters of the integrated model are calibrated using a maximum-likelihood approach. We used this integrated modelling approach to study in vivo gradients of the chemokine (C-C motif) ligand 21 (CCL21). CCL21 gradients guide dendritic cells and are important in the adaptive immune response. Using artificial data, we verified that the integrated modelling approach provides reliable parameter estimates in the presence of measurement noise and that bias and variance of these estimates are reduced compared to conventional approaches. The application to experimental data allowed the parametrization and subsequent refinement of the model using additional mechanisms. Among other results, model-based hypothesis testing predicted lymphatic vessel-dependent concentration of heparan sulfate, the binding partner of CCL21. The selected model provided an accurate description of the experimental data and was partially validated using published data. Our findings demonstrate that integrated statistical modelling of whole imaging data is computationally feasible and can provide novel biological insights.}, author = {Hross, Sabrina and Theis, Fabian J. and Sixt, Michael K and Hasenauer, Jan}, issn = {17425689}, journal = {Journal of the Royal Society Interface}, number = {149}, publisher = {Royal Society Publishing}, title = {{Mechanistic description of spatial processes using integrative modelling of noise-corrupted imaging data}}, doi = {10.1098/rsif.2018.0600}, volume = {15}, year = {2018}, } @article{16, abstract = {We report quantitative evidence of mixing-layer elastic instability in a viscoelastic fluid flow between two widely spaced obstacles hindering a channel flow at Re 1 and Wi 1. Two mixing layers with nonuniform shear velocity profiles are formed in the region between the obstacles. The mixing-layer instability arises in the vicinity of an inflection point on the shear velocity profile with a steep variation in the elastic stress. The instability results in an intermittent appearance of small vortices in the mixing layers and an amplification of spatiotemporal averaged vorticity in the elastic turbulence regime. The latter is characterized through scaling of friction factor with Wi and both pressure and velocity spectra. Furthermore, the observations reported provide improved understanding of the stability of the mixing layer in a viscoelastic fluid at large elasticity, i.e., Wi 1 and Re 1 and oppose the current view of suppression of vorticity solely by polymer additives.}, author = {Varshney, Atul and Steinberg, Victor}, journal = {Physical Review Fluids}, number = {10}, publisher = {American Physical Society}, title = {{Mixing layer instability and vorticity amplification in a creeping viscoelastic flow}}, doi = {10.1103/PhysRevFluids.3.103303}, volume = {3}, year = {2018}, } @article{43, abstract = {The initial amount of pathogens required to start an infection within a susceptible host is called the infective dose and is known to vary to a large extent between different pathogen species. We investigate the hypothesis that the differences in infective doses are explained by the mode of action in the underlying mechanism of pathogenesis: Pathogens with locally acting mechanisms tend to have smaller infective doses than pathogens with distantly acting mechanisms. While empirical evidence tends to support the hypothesis, a formal theoretical explanation has been lacking. We give simple analytical models to gain insight into this phenomenon and also investigate a stochastic, spatially explicit, mechanistic within-host model for toxin-dependent bacterial infections. The model shows that pathogens secreting locally acting toxins have smaller infective doses than pathogens secreting diffusive toxins, as hypothesized. While local pathogenetic mechanisms require smaller infective doses, pathogens with distantly acting toxins tend to spread faster and may cause more damage to the host. The proposed model can serve as a basis for the spatially explicit analysis of various virulence factors also in the context of other problems in infection dynamics.}, author = {Rybicki, Joel and Kisdi, Eva and Anttila, Jani}, journal = {PNAS}, number = {42}, pages = {10690 -- 10695}, publisher = {National Academy of Sciences}, title = {{Model of bacterial toxin-dependent pathogenesis explains infective dose}}, doi = {10.1073/pnas.1721061115}, volume = {115}, year = {2018}, } @article{13, abstract = {We propose a new method for fabricating digital objects through reusable silicone molds. Molds are generated by casting liquid silicone into custom 3D printed containers called metamolds. Metamolds automatically define the cuts that are needed to extract the cast object from the silicone mold. The shape of metamolds is designed through a novel segmentation technique, which takes into account both geometric and topological constraints involved in the process of mold casting. Our technique is simple, does not require changing the shape or topology of the input objects, and only requires off-the- shelf materials and technologies. We successfully tested our method on a set of challenging examples with complex shapes and rich geometric detail. © 2018 Association for Computing Machinery.}, author = {Alderighi, Thomas and Malomo, Luigi and Giorgi, Daniela and Pietroni, Nico and Bickel, Bernd and Cignoni, Paolo}, journal = {ACM Trans. Graph.}, number = {4}, publisher = {ACM}, title = {{Metamolds: Computational design of silicone molds}}, doi = {10.1145/3197517.3201381}, volume = {37}, year = {2018}, } @article{137, abstract = {Fluorescent sensors are an essential part of the experimental toolbox of the life sciences, where they are used ubiquitously to visualize intra- and extracellular signaling. In the brain, optical neurotransmitter sensors can shed light on temporal and spatial aspects of signal transmission by directly observing, for instance, neurotransmitter release and spread. Here we report the development and application of the first optical sensor for the amino acid glycine, which is both an inhibitory neurotransmitter and a co-agonist of the N-methyl-d-aspartate receptors (NMDARs) involved in synaptic plasticity. Computational design of a glycine-specific binding protein allowed us to produce the optical glycine FRET sensor (GlyFS), which can be used with single and two-photon excitation fluorescence microscopy. We took advantage of this newly developed sensor to test predictions about the uneven spatial distribution of glycine in extracellular space and to demonstrate that extracellular glycine levels are controlled by plasticity-inducing stimuli.}, author = {Zhang, William and Herde, Michel and Mitchell, Joshua and Whitfield, Jason and Wulff, Andreas and Vongsouthi, Vanessa and Sanchez Romero, Inmaculada and Gulakova, Polina and Minge, Daniel and Breithausen, Björn and Schoch, Susanne and Janovjak, Harald L and Jackson, Colin and Henneberger, Christian}, journal = {Nature Chemical Biology}, number = {9}, pages = {861 -- 869}, publisher = {Nature Publishing Group}, title = {{Monitoring hippocampal glycine with the computationally designed optical sensor GlyFS}}, doi = {10.1038/s41589-018-0108-2}, volume = {14}, year = {2018}, } @inbook{153, abstract = {Cells migrating in multicellular organisms steadily traverse complex three-dimensional (3D) environments. To decipher the underlying cell biology, current experimental setups either use simplified 2D, tissue-mimetic 3D (e.g., collagen matrices) or in vivo environments. While only in vivo experiments are truly physiological, they do not allow for precise manipulation of environmental parameters. 2D in vitro experiments do allow mechanical and chemical manipulations, but increasing evidence demonstrates substantial differences of migratory mechanisms in 2D and 3D. Here, we describe simple, robust, and versatile “pillar forests” to investigate cell migration in complex but fully controllable 3D environments. Pillar forests are polydimethylsiloxane-based setups, in which two closely adjacent surfaces are interconnected by arrays of micrometer-sized pillars. Changing the pillar shape, size, height and the inter-pillar distance precisely manipulates microenvironmental parameters (e.g., pore sizes, micro-geometry, micro-topology), while being easily combined with chemotactic cues, surface coatings, diverse cell types and advanced imaging techniques. Thus, pillar forests combine the advantages of 2D cell migration assays with the precise definition of 3D environmental parameters.}, author = {Renkawitz, Jörg and Reversat, Anne and Leithner, Alexander F and Merrin, Jack and Sixt, Michael K}, booktitle = {Methods in Cell Biology}, issn = {0091679X}, pages = {79 -- 91}, publisher = {Academic Press}, title = {{Micro-engineered “pillar forests” to study cell migration in complex but controlled 3D environments}}, doi = {10.1016/bs.mcb.2018.07.004}, volume = {147}, year = {2018}, } @article{54, abstract = {During epithelial tissue development, repair, and homeostasis, adherens junctions (AJs) ensure intercellular adhesion and tissue integrity while allowing for cell and tissue dynamics. Mechanical forces play critical roles in AJs’ composition and dynamics. Recent findings highlight that beyond a well-established role in reinforcing cell-cell adhesion, AJ mechanosensitivity promotes junctional remodeling and polarization, thereby regulating critical processes such as cell intercalation, division, and collective migration. Here, we provide an integrated view of mechanosensing mechanisms that regulate cell-cell contact composition, geometry, and integrity under tension and highlight pivotal roles for mechanosensitive AJ remodeling in preserving epithelial integrity and sustaining tissue dynamics.}, author = {Nunes Pinheiro, Diana C and Bellaïche, Yohanns}, journal = {Developmental Cell}, number = {1}, pages = {3 -- 19}, publisher = {Cell Press}, title = {{Mechanical force-driven adherents junction remodeling and epithelial dynamics}}, doi = {10.1016/j.devcel.2018.09.014}, volume = {47}, year = {2018}, }