@article{1588,
abstract = {We investigate the Taylor-Couette system where the radius ratio is close to unity. Systematically increasing the Reynolds number, we observe a number of previously known transitions, such as one from the classical Taylor vortex flow (TVF) to wavy vortex flow (WVF) and the transition to fully developed turbulence. Prior to the onset of turbulence, we observe intermittent bursting patterns of localized turbulent patches, confirming the experimentally observed pattern of very short wavelength bursts (VSWBs). A striking finding is that, for a Reynolds number larger than that for the onset of VSWBs, a new type of intermittently bursting behavior emerges: patterns of azimuthally closed rings of various orders. We call them ring-bursting patterns, which surround the cylinder completely but remain localized and separated in the axial direction through nonturbulent wavy structures. We employ a number of quantitative measures including the cross-flow energy to characterize the ring-bursting patterns and to distinguish them from the background flow. These patterns are interesting because they do not occur in the wide-gap Taylor-Couette flow systems. The narrow-gap regime is less studied but certainly deserves further attention to gain deeper insights into complex flow dynamics in fluids.},
author = {Altmeyer, Sebastian and Do, Younghae and Lai, Ying},
journal = {Physical Review E},
number = {5},
publisher = {American Physical Society},
title = {{Ring-bursting behavior en route to turbulence in narrow-gap Taylor-Couette flows}},
doi = {10.1103/PhysRevE.92.053018},
volume = {92},
year = {2015},
}
@article{1589,
abstract = {We investigate the dynamics of ferrofluidic wavy vortex flows in the counter-rotating Taylor-Couette system, with a focus on wavy flows with a mixture of the dominant azimuthal modes. Without external magnetic field flows are stable and pro-grade with respect to the rotation of the inner cylinder. More complex behaviors can arise when an axial or a transverse magnetic field is applied. Depending on the direction and strength of the field, multi-stable wavy states and bifurcations can occur. We uncover the phenomenon of flow pattern reversal as the strength of the magnetic field is increased through a critical value. In between the regimes of pro-grade and retrograde flow rotations, standing waves with zero angular velocities can emerge. A striking finding is that, under a transverse magnetic field, a second reversal in the flow pattern direction can occur, where the flow pattern evolves into pro-grade rotation again from a retrograde state. Flow reversal is relevant to intriguing phenomena in nature such as geomagnetic reversal. Our results suggest that, in ferrofluids, flow pattern reversal can be induced by varying a magnetic field in a controlled manner, which can be realized in laboratory experiments with potential applications in the development of modern fluid devices.},
author = {Altmeyer, Sebastian and Do, Younghae and Lai, Ying},
journal = {Scientific Reports},
publisher = {Nature Publishing Group},
title = {{Magnetic field induced flow pattern reversal in a ferrofluidic Taylor-Couette system}},
doi = {10.1038/srep18589},
volume = {5},
year = {2015},
}
@inbook{1590,
abstract = {The straight skeleton of a polygon is the geometric graph obtained by tracing the vertices during a mitered offsetting process. It is known that the straight skeleton of a simple polygon is a tree, and one can naturally derive directions on the edges of the tree from the propagation of the shrinking process. In this paper, we ask the reverse question: Given a tree with directed edges, can it be the straight skeleton of a polygon? And if so, can we find a suitable simple polygon? We answer these questions for all directed trees where the order of edges around each node is fixed.},
author = {Aichholzer, Oswin and Biedl, Therese and Hackl, Thomas and Held, Martin and Huber, Stefan and Palfrader, Peter and Vogtenhuber, Birgit},
booktitle = {Graph Drawing and Network Visualization},
location = {Los Angeles, CA, United States},
pages = {335 -- 347},
publisher = {Springer},
title = {{Representing directed trees as straight skeletons}},
doi = {10.1007/978-3-319-27261-0_28},
volume = {9411},
year = {2015},
}
@article{1591,
abstract = {Auxin participates in a multitude of developmental processes, as well as responses to environmental cues. Compared with other plant hormones, auxin exhibits a unique property, as it undergoes directional, cell-to-cell transport facilitated by plasma membrane-localized transport proteins. Among them, a prominent role has been ascribed to the PIN family of auxin efflux facilitators. PIN proteins direct polar auxin transport on account of their asymmetric subcellular localizations. In this review, we provide an overview of the multiple developmental roles of PIN proteins, including the atypical endoplasmic reticulum-localized members of the family, and look at the family from an evolutionary perspective. Next, we cover the cell biological and molecular aspects of PIN function, in particular the establishment of their polar subcellular localization. Hormonal and environmental inputs into the regulation of PIN action are summarized as well.},
author = {Adamowski, Maciek and Friml, Jirí},
journal = {Plant Cell},
number = {1},
pages = {20 -- 32},
publisher = {American Society of Plant Biologists},
title = {{PIN-dependent auxin transport: Action, regulation, and evolution}},
doi = {10.1105/tpc.114.134874},
volume = {27},
year = {2015},
}
@article{1593,
abstract = {Plants are sessile organisms that are permanently restricted to their site of germination. To compensate for their lack of mobility, plants evolved unique mechanisms enabling them to rapidly react to ever changing environmental conditions and flexibly adapt their postembryonic developmental program. A prominent demonstration of this developmental plasticity is their ability to bend organs in order to reach the position most optimal for growth and utilization of light, nutrients, and other resources. Shortly after germination, dicotyledonous seedlings form a bended structure, the so-called apical hook, to protect the delicate shoot meristem and cotyledons from damage when penetrating through the soil. Upon perception of a light stimulus, the apical hook rapidly opens and the photomorphogenic developmental program is activated. After germination, plant organs are able to align their growth with the light source and adopt the most favorable orientation through bending, in a process named phototropism. On the other hand, when roots and shoots are diverted from their upright orientation, they immediately detect a change in the gravity vector and bend to maintain a vertical growth direction. Noteworthy, despite the diversity of external stimuli perceived by different plant organs, all plant tropic movements share a common mechanistic basis: differential cell growth. In our review, we will discuss the molecular principles underlying various tropic responses with the focus on mechanisms mediating the perception of external signals, transduction cascades and downstream responses that regulate differential cell growth and consequently, organ bending. In particular, we highlight common and specific features of regulatory pathways in control of the bending of organs and a role for the plant hormone auxin as a key regulatory component.},
author = {Žádníková, Petra and Smet, Dajo and Zhu, Qiang and Van Der Straeten, Dominique and Benková, Eva},
journal = {Frontiers in Plant Science},
number = {4},
publisher = {Frontiers Research Foundation},
title = {{Strategies of seedlings to overcome their sessile nature: Auxin in mobility control}},
doi = {10.3389/fpls.2015.00218},
volume = {6},
year = {2015},
}
@inproceedings{1594,
abstract = {Quantitative extensions of temporal logics have recently attracted significant attention. In this work, we study frequency LTL (fLTL), an extension of LTL which allows to speak about frequencies of events along an execution. Such an extension is particularly useful for probabilistic systems that often cannot fulfil strict qualitative guarantees on the behaviour. It has been recently shown that controller synthesis for Markov decision processes and fLTL is decidable when all the bounds on frequencies are 1. As a step towards a complete quantitative solution, we show that the problem is decidable for the fragment fLTL\GU, where U does not occur in the scope of G (but still F can). Our solution is based on a novel translation of such quantitative formulae into equivalent deterministic automata.},
author = {Forejt, Vojtěch and Krčál, Jan and Kretinsky, Jan},
location = {Suva, Fiji},
pages = {162 -- 177},
publisher = {Springer},
title = {{Controller synthesis for MDPs and frequency LTL\GU}},
doi = {10.1007/978-3-662-48899-7_12},
volume = {9450},
year = {2015},
}
@inproceedings{1595,
abstract = {A drawing of a graph G is radial if the vertices of G are placed on concentric circles C1, . . . , Ck with common center c, and edges are drawn radially: every edge intersects every circle centered at c at most once. G is radial planar if it has a radial embedding, that is, a crossing- free radial drawing. If the vertices of G are ordered or partitioned into ordered levels (as they are for leveled graphs), we require that the assignment of vertices to circles corresponds to the given ordering or leveling. We show that a graph G is radial planar if G has a radial drawing in which every two edges cross an even number of times; the radial embedding has the same leveling as the radial drawing. In other words, we establish the weak variant of the Hanani-Tutte theorem for radial planarity. This generalizes a result by Pach and Tóth.},
author = {Fulek, Radoslav and Pelsmajer, Michael and Schaefer, Marcus},
location = {Los Angeles, CA, USA},
pages = {99 -- 110},
publisher = {Springer},
title = {{Hanani-Tutte for radial planarity}},
doi = {10.1007/978-3-319-27261-0_9},
volume = {9411},
year = {2015},
}
@inproceedings{1596,
abstract = {Let C={C1,...,Cn} denote a collection of translates of a regular convex k-gon in the plane with the stacking order. The collection C forms a visibility clique if for everyi < j the intersection Ci and (Ci ∩ Cj)\⋃i<l<jCl =∅.elements that are stacked between them, i.e., We show that if C forms a visibility clique its size is bounded from above by O(k4) thereby improving the upper bound of 22k from the aforementioned paper. We also obtain an upper bound of 22(k/2)+2 on the size of a visibility clique for homothetes of a convex (not necessarily regular) k-gon.},
author = {Fulek, Radoslav and Radoičić, Radoš},
location = {Los Angeles, CA, United States},
pages = {373 -- 379},
publisher = {Springer},
title = {{Vertical visibility among parallel polygons in three dimensions}},
doi = {10.1007/978-3-319-27261-0_31},
volume = {9411},
year = {2015},
}
@article{1598,
abstract = {We consider Markov decision processes (MDPs) with specifications given as Büchi (liveness) objectives, and examine the problem of computing the set of almost-sure winning vertices such that the objective can be ensured with probability 1 from these vertices. We study for the first time the average-case complexity of the classical algorithm for computing the set of almost-sure winning vertices for MDPs with Büchi objectives. Our contributions are as follows: First, we show that for MDPs with constant out-degree the expected number of iterations is at most logarithmic and the average-case running time is linear (as compared to the worst-case linear number of iterations and quadratic time complexity). Second, for the average-case analysis over all MDPs we show that the expected number of iterations is constant and the average-case running time is linear (again as compared to the worst-case linear number of iterations and quadratic time complexity). Finally we also show that when all MDPs are equally likely, the probability that the classical algorithm requires more than a constant number of iterations is exponentially small.},
author = {Chatterjee, Krishnendu and Joglekar, Manas and Shah, Nisarg},
journal = {Theoretical Computer Science},
number = {3},
pages = {71 -- 89},
publisher = {Elsevier},
title = {{Average case analysis of the classical algorithm for Markov decision processes with Büchi objectives}},
doi = {10.1016/j.tcs.2015.01.050},
volume = {573},
year = {2015},
}
@inproceedings{1601,
abstract = {We propose a flexible exchange format for ω-automata, as typically used in formal verification, and implement support for it in a range of established tools. Our aim is to simplify the interaction of tools, helping the research community to build upon other people’s work. A key feature of the format is the use of very generic acceptance conditions, specified by Boolean combinations of acceptance primitives, rather than being limited to common cases such as Büchi, Streett, or Rabin. Such flexibility in the choice of acceptance conditions can be exploited in applications, for example in probabilistic model checking, and furthermore encourages the development of acceptance-agnostic tools for automata manipulations. The format allows acceptance conditions that are either state-based or transition-based, and also supports alternating automata.},
author = {Babiak, Tomáš and Blahoudek, František and Duret Lutz, Alexandre and Klein, Joachim and Kretinsky, Jan and Mueller, Daniel and Parker, David and Strejček, Jan},
location = {San Francisco, CA, United States},
pages = {479 -- 486},
publisher = {Springer},
title = {{The Hanoi omega-automata format}},
doi = {10.1007/978-3-319-21690-4_31},
volume = {9206},
year = {2015},
}
@article{1602,
abstract = {Interprocedural analysis is at the heart of numerous applications in programming languages, such as alias analysis, constant propagation, etc. Recursive state machines (RSMs) are standard models for interprocedural analysis. We consider a general framework with RSMs where the transitions are labeled from a semiring, and path properties are algebraic with semiring operations. RSMs with algebraic path properties can model interprocedural dataflow analysis problems, the shortest path problem, the most probable path problem, etc. The traditional algorithms for interprocedural analysis focus on path properties where the starting point is fixed as the entry point of a specific method. In this work, we consider possible multiple queries as required in many applications such as in alias analysis. The study of multiple queries allows us to bring in a very important algorithmic distinction between the resource usage of the one-time preprocessing vs for each individual query. The second aspect that we consider is that the control flow graphs for most programs have constant treewidth. Our main contributions are simple and implementable algorithms that supportmultiple queries for algebraic path properties for RSMs that have constant treewidth. Our theoretical results show that our algorithms have small additional one-time preprocessing, but can answer subsequent queries significantly faster as compared to the current best-known solutions for several important problems, such as interprocedural reachability and shortest path. We provide a prototype implementation for interprocedural reachability and intraprocedural shortest path that gives a significant speed-up on several benchmarks.},
author = {Chatterjee, Krishnendu and Ibsen-Jensen, Rasmus and Pavlogiannis, Andreas and Goyal, Prateesh},
journal = {ACM SIGPLAN Notices},
location = {Mumbai, India},
number = {1},
pages = {97 -- 109},
publisher = {ACM},
title = {{Faster algorithms for algebraic path properties in recursive state machines with constant treewidth}},
doi = {10.1145/2676726.2676979},
volume = {50},
year = {2015},
}
@inproceedings{1603,
abstract = {For deterministic systems, a counterexample to a property can simply be an error trace, whereas counterexamples in probabilistic systems are necessarily more complex. For instance, a set of erroneous traces with a sufficient cumulative probability mass can be used. Since these are too large objects to understand and manipulate, compact representations such as subchains have been considered. In the case of probabilistic systems with non-determinism, the situation is even more complex. While a subchain for a given strategy (or scheduler, resolving non-determinism) is a straightforward choice, we take a different approach. Instead, we focus on the strategy itself, and extract the most important decisions it makes, and present its succinct representation.
The key tools we employ to achieve this are (1) introducing a concept of importance of a state w.r.t. the strategy, and (2) learning using decision trees. There are three main consequent advantages of our approach. Firstly, it exploits the quantitative information on states, stressing the more important decisions. Secondly, it leads to a greater variability and degree of freedom in representing the strategies. Thirdly, the representation uses a self-explanatory data structure. In summary, our approach produces more succinct and more explainable strategies, as opposed to e.g. binary decision diagrams. Finally, our experimental results show that we can extract several rules describing the strategy even for very large systems that do not fit in memory, and based on the rules explain the erroneous behaviour.},
author = {Brázdil, Tomáš and Chatterjee, Krishnendu and Chmelik, Martin and Fellner, Andreas and Kretinsky, Jan},
location = {San Francisco, CA, United States},
pages = {158 -- 177},
publisher = {Springer},
title = {{Counterexample explanation by learning small strategies in Markov decision processes}},
doi = {10.1007/978-3-319-21690-4_10},
volume = {9206},
year = {2015},
}
@article{1604,
abstract = {We consider the quantitative analysis problem for interprocedural control-flow graphs (ICFGs). The input consists of an ICFG, a positive weight function that assigns every transition a positive integer-valued number, and a labelling of the transitions (events) as good, bad, and neutral events. The weight function assigns to each transition a numerical value that represents ameasure of how good or bad an event is. The quantitative analysis problem asks whether there is a run of the ICFG where the ratio of the sum of the numerical weights of good events versus the sum of weights of bad events in the long-run is at least a given threshold (or equivalently, to compute the maximal ratio among all valid paths in the ICFG). The quantitative analysis problem for ICFGs can be solved in polynomial time, and we present an efficient and practical algorithm for the problem. We show that several problems relevant for static program analysis, such as estimating the worst-case execution time of a program or the average energy consumption of a mobile application, can be modeled in our framework. We have implemented our algorithm as a tool in the Java Soot framework. We demonstrate the effectiveness of our approach with two case studies. First, we show that our framework provides a sound approach (no false positives) for the analysis of inefficiently-used containers. Second, we show that our approach can also be used for static profiling of programs which reasons about methods that are frequently invoked. Our experimental results show that our tool scales to relatively large benchmarks, and discovers relevant and useful information that can be used to optimize performance of the programs.},
author = {Chatterjee, Krishnendu and Pavlogiannis, Andreas and Velner, Yaron},
isbn = {978-1-4503-3300-9},
journal = {Proceedings of the 42nd Annual ACM SIGPLAN-SIGACT },
location = {Mumbai, India},
number = {1},
pages = {539 -- 551},
publisher = {ACM},
title = {{Quantitative interprocedural analysis}},
doi = {10.1145/2676726.2676968},
volume = {50},
year = {2015},
}
@inproceedings{1605,
abstract = {Multiaffine hybrid automata (MHA) represent a powerful formalism to model complex dynamical systems. This formalism is particularly suited for the representation of biological systems which often exhibit highly non-linear behavior. In this paper, we consider the problem of parameter identification for MHA. We present an abstraction of MHA based on linear hybrid automata, which can be analyzed by the SpaceEx model checker. This abstraction enables a precise handling of time-dependent properties. We demonstrate the potential of our approach on a model of a genetic regulatory network and a myocyte model.},
author = {Bogomolov, Sergiy and Schilling, Christian and Bartocci, Ezio and Batt, Grégory and Kong, Hui and Grosu, Radu},
location = {Haifa, Israel},
pages = {19 -- 35},
publisher = {Springer},
title = {{Abstraction-based parameter synthesis for multiaffine systems}},
doi = {10.1007/978-3-319-26287-1_2},
volume = {9434},
year = {2015},
}
@inproceedings{1606,
abstract = {In this paper, we present the first steps toward a runtime verification framework for monitoring hybrid and cyber-physical systems (CPS) development tools based on randomized differential testing. The development tools include hybrid systems reachability analysis tools, model-based development environments like Simulink/Stateflow (SLSF), etc. First, hybrid automaton models are randomly generated. Next, these hybrid automaton models are translated to a number of different tools (currently, SpaceEx, dReach, Flow*, HyCreate, and the MathWorks’ Simulink/Stateflow) using the HyST source transformation and translation tool. Then, the hybrid automaton models are executed in the different tools and their outputs are parsed. The final step is the differential comparison: the outputs of the different tools are compared. If the results do not agree (in the sense that an analysis or verification result from one tool does not match that of another tool, ignoring timeouts, etc.), a candidate bug is flagged and the model is saved for future analysis by the user. The process then repeats and the monitoring continues until the user terminates the process. We present preliminary results that have been useful in identifying a few bugs in the analysis methods of different development tools, and in an earlier version of HyST.},
author = {Nguyen, Luan and Schilling, Christian and Bogomolov, Sergiy and Johnson, Taylor},
location = {Vienna, Austria},
pages = {281 -- 286},
publisher = {Springer},
title = {{Runtime verification for hybrid analysis tools}},
doi = {10.1007/978-3-319-23820-3_19},
volume = {9333},
year = {2015},
}
@inproceedings{1607,
abstract = {We consider the core algorithmic problems related to verification of systems with respect to three classical quantitative properties, namely, the mean-payoff property, the ratio property, and the minimum initial credit for energy property. The algorithmic problem given a graph and a quantitative property asks to compute the optimal value (the infimum value over all traces) from every node of the graph. We consider graphs with constant treewidth, and it is well-known that the control-flow graphs of most programs have constant treewidth. Let n denote the number of nodes of a graph, m the number of edges (for constant treewidth graphs m=O(n)) and W the largest absolute value of the weights. Our main theoretical results are as follows. First, for constant treewidth graphs we present an algorithm that approximates the mean-payoff value within a multiplicative factor of ϵ in time O(n⋅log(n/ϵ)) and linear space, as compared to the classical algorithms that require quadratic time. Second, for the ratio property we present an algorithm that for constant treewidth graphs works in time O(n⋅log(|a⋅b|))=O(n⋅log(n⋅W)), when the output is ab, as compared to the previously best known algorithm with running time O(n2⋅log(n⋅W)). Third, for the minimum initial credit problem we show that (i) for general graphs the problem can be solved in O(n2⋅m) time and the associated decision problem can be solved in O(n⋅m) time, improving the previous known O(n3⋅m⋅log(n⋅W)) and O(n2⋅m) bounds, respectively; and (ii) for constant treewidth graphs we present an algorithm that requires O(n⋅logn) time, improving the previous known O(n4⋅log(n⋅W)) bound. We have implemented some of our algorithms and show that they present a significant speedup on standard benchmarks.},
author = {Chatterjee, Krishnendu and Ibsen-Jensen, Rasmus and Pavlogiannis, Andreas},
location = {San Francisco, CA, USA},
pages = {140 -- 157},
publisher = {Springer},
title = {{Faster algorithms for quantitative verification in constant treewidth graphs}},
doi = {10.1007/978-3-319-21690-4_9},
volume = {9206},
year = {2015},
}
@inproceedings{1609,
abstract = {The synthesis problem asks for the automatic construction of a system from its specification. In the traditional setting, the system is “constructed from scratch” rather than composed from reusable components. However, this is rare in practice, and almost every non-trivial software system relies heavily on the use of libraries of reusable components. Recently, Lustig and Vardi introduced dataflow and controlflow synthesis from libraries of reusable components. They proved that dataflow synthesis is undecidable, while controlflow synthesis is decidable. The problem of controlflow synthesis from libraries of probabilistic components was considered by Nain, Lustig and Vardi, and was shown to be decidable for qualitative analysis (that asks that the specification be satisfied with probability 1). Our main contribution for controlflow synthesis from probabilistic components is to establish better complexity bounds for the qualitative analysis problem, and to show that the more general quantitative problem is undecidable. For the qualitative analysis, we show that the problem (i) is EXPTIME-complete when the specification is given as a deterministic parity word automaton, improving the previously known 2EXPTIME upper bound; and (ii) belongs to UP ∩ coUP and is parity-games hard, when the specification is given directly as a parity condition on the components, improving the previously known EXPTIME upper bound.},
author = {Chatterjee, Krishnendu and Doyen, Laurent and Vardi, Moshe},
location = {Kyoto, Japan},
pages = {108 -- 120},
publisher = {Springer},
title = {{The complexity of synthesis from probabilistic components}},
doi = {10.1007/978-3-662-47666-6_9},
volume = {9135},
year = {2015},
}
@inproceedings{1610,
abstract = {The edit distance between two words w1, w2 is the minimal number of word operations (letter insertions, deletions, and substitutions) necessary to transform w1 to w2. The edit distance generalizes to languages L1,L2, where the edit distance is the minimal number k such that for every word from L1 there exists a word in L2 with edit distance at most k. We study the edit distance computation problem between pushdown automata and their subclasses. The problem of computing edit distance to pushdown automata is undecidable, and in practice, the interesting question is to compute the edit distance from a pushdown automaton (the implementation, a standard model for programs with recursion) to a regular language (the specification). In this work, we present a complete picture of decidability and complexity for deciding whether, for a given threshold k, the edit distance from a pushdown automaton to a finite automaton is at most k.},
author = {Chatterjee, Krishnendu and Henzinger, Thomas A and Ibsen-Jensen, Rasmus and Otop, Jan},
location = {Kyoto, Japan},
number = {Part II},
pages = {121 -- 133},
publisher = {Springer},
title = {{Edit distance for pushdown automata}},
doi = {10.1007/978-3-662-47666-6_10},
volume = {9135},
year = {2015},
}
@article{1611,
abstract = {Biosensors for signaling molecules allow the study of physiological processes by bringing together the fields of protein engineering, fluorescence imaging, and cell biology. Construction of genetically encoded biosensors generally relies on the availability of a binding "core" that is both specific and stable, which can then be combined with fluorescent molecules to create a sensor. However, binding proteins with the desired properties are often not available in nature and substantial improvement to sensors can be required, particularly with regard to their durability. Ancestral protein reconstruction is a powerful protein-engineering tool able to generate highly stable and functional proteins. In this work, we sought to establish the utility of ancestral protein reconstruction to biosensor development, beginning with the construction of an l-arginine biosensor. l-arginine, as the immediate precursor to nitric oxide, is an important molecule in many physiological contexts including brain function. Using a combination of ancestral reconstruction and circular permutation, we constructed a Förster resonance energy transfer (FRET) biosensor for l-arginine (cpFLIPR). cpFLIPR displays high sensitivity and specificity, with a Kd of ∼14 μM and a maximal dynamic range of 35%. Importantly, cpFLIPR was highly robust, enabling accurate l-arginine measurement at physiological temperatures. We established that cpFLIPR is compatible with two-photon excitation fluorescence microscopy and report l-arginine concentrations in brain tissue.},
author = {Whitfield, Jason and Zhang, William and Herde, Michel and Clifton, Ben and Radziejewski, Johanna and Janovjak, Harald L and Henneberger, Christian and Jackson, Colin},
journal = {Protein Science},
number = {9},
pages = {1412 -- 1422},
publisher = {Wiley},
title = {{Construction of a robust and sensitive arginine biosensor through ancestral protein reconstruction}},
doi = {10.1002/pro.2721},
volume = {24},
year = {2015},
}
@article{1614,
abstract = {GABAergic perisoma-inhibiting fast-spiking interneurons (PIIs) effectively control the activity of large neuron populations by their wide axonal arborizations. It is generally assumed that the output of one PII to its target cells is strong and rapid. Here, we show that, unexpectedly, both strength and time course of PII-mediated perisomatic inhibition change with distance between synaptically connected partners in the rodent hippocampus. Synaptic signals become weaker due to lower contact numbers and decay more slowly with distance, very likely resulting from changes in GABAA receptor subunit composition. When distance-dependent synaptic inhibition is introduced to a rhythmically active neuronal network model, randomly driven principal cell assemblies are strongly synchronized by the PIIs, leading to higher precision in principal cell spike times than in a network with uniform synaptic inhibition. },
author = {Strüber, Michael and Jonas, Peter M and Bartos, Marlene},
journal = {PNAS},
number = {4},
pages = {1220 -- 1225},
publisher = {National Academy of Sciences},
title = {{Strength and duration of perisomatic GABAergic inhibition depend on distance between synaptically connected cells}},
doi = {10.1073/pnas.1412996112},
volume = {112},
year = {2015},
}
@article{1615,
abstract = {Loss-of-function mutations in the synaptic adhesion protein Neuroligin-4 are among the most common genetic abnormalities associated with autism spectrum disorders, but little is known about the function of Neuroligin-4 and the consequences of its loss. We assessed synaptic and network characteristics in Neuroligin-4 knockout mice, focusing on the hippocampus as a model brain region with a critical role in cognition and memory, and found that Neuroligin-4 deletion causes subtle defects of the protein composition and function of GABAergic synapses in the hippocampal CA3 region. Interestingly, these subtle synaptic changes are accompanied by pronounced perturbations of γ-oscillatory network activity, which has been implicated in cognitive function and is altered in multiple psychiatric and neurodevelopmental disorders. Our data provide important insights into the mechanisms by which Neuroligin-4-dependent GABAergic synapses may contribute to autism phenotypes and indicate new strategies for therapeutic approaches.},
author = {Hammer, Matthieu and Krueger Burg, Dilja and Tuffy, Liam and Cooper, Benjamin and Taschenberger, Holger and Goswami, Sarit and Ehrenreich, Hannelore and Jonas, Peter M and Varoqueaux, Frederique and Rhee, Jeong and Brose, Nils},
journal = {Cell Reports},
number = {3},
pages = {516 -- 523},
publisher = {Cell Press},
title = {{Perturbed hippocampal synaptic inhibition and γ-oscillations in a neuroligin-4 knockout mouse model of autism}},
doi = {10.1016/j.celrep.2015.09.011},
volume = {13},
year = {2015},
}
@article{1618,
abstract = {CCL19 and CCL21 are chemokines involved in the trafficking of immune cells, particularly within the lymphatic system, through activation of CCR7. Concurrent expression of PSGL-1 and CCR7 in naive T-cells enhances recruitment of these cells to secondary lymphoid organs by CCL19 and CCL21. Here the solution structure of CCL19 is reported. It contains a canonical chemokine domain. Chemical shift mapping shows the N-termini of PSGL-1 and CCR7 have overlapping binding sites for CCL19 and binding is competitive. Implications for the mechanism of PSGL-1's enhancement of resting T-cell recruitment are discussed.},
author = {Veldkamp, Christopher and Kiermaier, Eva and Gabel Eissens, Skylar and Gillitzer, Miranda and Lippner, David and Disilvio, Frank and Mueller, Casey and Wantuch, Paeton and Chaffee, Gary and Famiglietti, Michael and Zgoba, Danielle and Bailey, Asha and Bah, Yaya and Engebretson, Samantha and Graupner, David and Lackner, Emily and Larosa, Vincent and Medeiros, Tysha and Olson, Michael and Phillips, Andrew and Pyles, Harley and Richard, Amanda and Schoeller, Scott and Touzeau, Boris and Williams, Larry and Sixt, Michael K and Peterson, Francis},
journal = {Biochemistry},
number = {27},
pages = {4163 -- 4166},
publisher = {ACS},
title = {{Solution structure of CCL19 and identification of overlapping CCR7 and PSGL-1 binding sites}},
doi = {10.1021/acs.biochem.5b00560},
volume = {54},
year = {2015},
}
@article{1623,
abstract = {Background
Photosynthetic cyanobacteria are attractive for a range of biotechnological applications including biofuel production. However, due to slow growth, screening of mutant libraries using microtiter plates is not feasible.
Results
We present a method for high-throughput, single-cell analysis and sorting of genetically engineered l-lactate-producing strains of Synechocystis sp. PCC6803. A microfluidic device is used to encapsulate single cells in picoliter droplets, assay the droplets for l-lactate production, and sort strains with high productivity. We demonstrate the separation of low- and high-producing reference strains, as well as enrichment of a more productive l-lactate-synthesizing population after UV-induced mutagenesis. The droplet platform also revealed population heterogeneity in photosynthetic growth and lactate production, as well as the presence of metabolically stalled cells.
Conclusions
The workflow will facilitate metabolic engineering and directed evolution studies and will be useful in studies of cyanobacteria biochemistry and physiology.
},
author = {Hammar, Petter and Angermayr, Andreas and Sjostrom, Staffan and Van Der Meer, Josefin and Hellingwerf, Klaas and Hudson, Elton and Joensson, Hakaan},
journal = {Biotechnology for Biofuels},
number = {1},
publisher = {BioMed Central},
title = {{Single-cell screening of photosynthetic growth and lactate production by cyanobacteria}},
doi = {10.1186/s13068-015-0380-2},
volume = {8},
year = {2015},
}
@article{1624,
abstract = {Population structure can facilitate evolution of cooperation. In a structured population, cooperators can form clusters which resist exploitation by defectors. Recently, it was observed that a shift update rule is an extremely strong amplifier of cooperation in a one dimensional spatial model. For the shift update rule, an individual is chosen for reproduction proportional to fecundity; the offspring is placed next to the parent; a random individual dies. Subsequently, the population is rearranged (shifted) until all individual cells are again evenly spaced out. For large population size and a one dimensional population structure, the shift update rule favors cooperation for any benefit-to-cost ratio greater than one. But every attempt to generalize shift updating to higher dimensions while maintaining its strong effect has failed. The reason is that in two dimensions the clusters are fragmented by the movements caused by rearranging the cells. Here we introduce the natural phenomenon of a repulsive force between cells of different types. After a birth and death event, the cells are being rearranged minimizing the overall energy expenditure. If the repulsive force is sufficiently high, shift becomes a strong promoter of cooperation in two dimensions.},
author = {Pavlogiannis, Andreas and Chatterjee, Krishnendu and Adlam, Ben and Nowak, Martin},
journal = {Scientific Reports},
publisher = {Nature Publishing Group},
title = {{Cellular cooperation with shift updating and repulsion}},
doi = {10.1038/srep17147},
volume = {5},
year = {2015},
}
@inproceedings{1625,
abstract = {In recent years we have seen numerous improvements on 3D scanning and tracking of human faces, greatly advancing the creation of digital doubles for film and video games. However, despite the high-resolution quality of the reconstruction approaches available, current methods are unable to capture one of the most important regions of the face - the eye region. In this work we present the first method for detailed spatio-temporal reconstruction of eyelids. Tracking and reconstructing eyelids is extremely challenging, as this region exhibits very complex and unique skin deformation where skin is folded under while opening the eye. Furthermore, eyelids are often only partially visible and obstructed due to selfocclusion and eyelashes. Our approach is to combine a geometric deformation model with image data, leveraging multi-view stereo, optical flow, contour tracking and wrinkle detection from local skin appearance. Our deformation model serves as a prior that enables reconstruction of eyelids even under strong self-occlusions caused by rolling and folding skin as the eye opens and closes. The output is a person-specific, time-varying eyelid reconstruction with anatomically plausible deformations. Our high-resolution detailed eyelids couple naturally with current facial performance capture approaches. As a result, our method can largely increase the fidelity of facial capture and the creation of digital doubles.},
author = {Bermano, Amit and Beeler, Thabo and Kozlov, Yeara and Bradley, Derek and Bickel, Bernd and Gross, Markus},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{Detailed spatio-temporal reconstruction of eyelids}},
doi = {10.1145/2766924},
volume = {34},
year = {2015},
}
@inproceedings{1626,
abstract = {This paper introduces "OmniAD," a novel data-driven pipeline to model and acquire the aerodynamics of three-dimensional rigid objects. Traditionally, aerodynamics are examined through elaborate wind tunnel experiments or expensive fluid dynamics computations, and are only measured for a small number of discrete wind directions. OmniAD allows the evaluation of aerodynamic forces, such as drag and lift, for any incoming wind direction using a novel representation based on spherical harmonics. Our datadriven technique acquires the aerodynamic properties of an object simply by capturing its falling motion using a single camera. Once model parameters are estimated, OmniAD enables realistic realtime simulation of rigid bodies, such as the tumbling and gliding of leaves, without simulating the surrounding air. In addition, we propose an intuitive user interface based on OmniAD to interactively design three-dimensional kites that actually fly. Various nontraditional kites were designed to demonstrate the physical validity of our model.},
author = {Martin, Tobias and Umetani, Nobuyuki and Bickel, Bernd},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{OmniAD: Data-driven omni-directional aerodynamics}},
doi = {10.1145/2766919},
volume = {34},
year = {2015},
}
@inproceedings{1627,
abstract = {We present a computational tool for fabrication-oriented design of flexible rod meshes. Given a deformable surface and a set of deformed poses as input, our method automatically computes a printable rod mesh that, once manufactured, closely matches the input poses under the same boundary conditions. The core of our method is formed by an optimization scheme that adjusts the cross-sectional profiles of the rods and their rest centerline in order to best approximate the target deformations. This approach allows us to locally control the bending and stretching resistance of the surface with a single material, yielding high design flexibility and low fabrication cost.},
author = {Pérez, Jesús and Thomaszewski, Bernhard and Coros, Stelian and Bickel, Bernd and Canabal, José and Sumner, Robert and Otaduy, Miguel},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{Design and fabrication of flexible rod meshes}},
doi = {10.1145/2766998},
volume = {34},
year = {2015},
}
@inproceedings{1628,
abstract = {We propose a method for fabricating deformable objects with spatially varying elasticity using 3D printing. Using a single, relatively stiff printer material, our method designs an assembly of smallscale microstructures that have the effect of a softer material at the object scale, with properties depending on the microstructure used in each part of the object. We build on work in the area of metamaterials, using numerical optimization to design tiled microstructures with desired properties, but with the key difference that our method designs families of related structures that can be interpolated to smoothly vary the material properties over a wide range. To create an object with spatially varying elastic properties, we tile the object's interior with microstructures drawn from these families, generating a different microstructure for each cell using an efficient algorithm to select compatible structures for neighboring cells. We show results computed for both 2D and 3D objects, validating several 2D and 3D printed structures using standard material tests as well as demonstrating various example applications.},
author = {Schumacher, Christian and Bickel, Bernd and Rys, Jan and Marschner, Steve and Daraio, Chiara and Gross, Markus},
location = {Los Angeles, CA, USA},
number = {4},
publisher = {ACM},
title = {{Microstructures to control elasticity in 3D printing}},
doi = {10.1145/2766926},
volume = {34},
year = {2015},
}
@inproceedings{1630,
abstract = {We present a method to learn and propagate shape placements in 2D polygonal scenes from a few examples provided by a user. The placement of a shape is modeled as an oriented bounding box. Simple geometric relationships between this bounding box and nearby scene polygons define a feature set for the placement. The feature sets of all example placements are then used to learn a probabilistic model over all possible placements and scenes. With this model, we can generate a new set of placements with similar geometric relationships in any given scene. We introduce extensions that enable propagation and generation of shapes in 3D scenes, as well as the application of a learned modeling session to large scenes without additional user interaction. These concepts allow us to generate complex scenes with thousands of objects with relatively little user interaction.},
author = {Guerrero, Paul and Jeschke, Stefan and Wimmer, Michael and Wonka, Peter},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{Learning shape placements by example}},
doi = {10.1145/2766933},
volume = {34},
year = {2015},
}
@inproceedings{1632,
abstract = {This paper presents a liquid simulation technique that enforces the incompressibility condition using a stream function solve instead of a pressure projection. Previous methods have used stream function techniques for the simulation of detailed single-phase flows, but a formulation for liquid simulation has proved elusive in part due to the free surface boundary conditions. In this paper, we introduce a stream function approach to liquid simulations with novel boundary conditions for free surfaces, solid obstacles, and solid-fluid coupling.
Although our approach increases the dimension of the linear system necessary to enforce incompressibility, it provides interesting and surprising benefits. First, the resulting flow is guaranteed to be divergence-free regardless of the accuracy of the solve. Second, our free-surface boundary conditions guarantee divergence-free motion even in the un-simulated air phase, which enables two-phase flow simulation by only computing a single phase. We implemented this method using a variant of FLIP simulation which only samples particles within a narrow band of the liquid surface, and we illustrate the effectiveness of our method for detailed two-phase flow simulations with complex boundaries, detailed bubble interactions, and two-way solid-fluid coupling.},
author = {Ando, Ryoichi and Thuerey, Nils and Wojtan, Christopher J},
location = {Los Angeles, CA, USA},
number = {4},
publisher = {ACM},
title = {{A stream function solver for liquid simulations}},
doi = {10.1145/2766935},
volume = {34},
year = {2015},
}
@inproceedings{1633,
abstract = {We present a method for simulating brittle fracture under the assumptions of quasi-static linear elastic fracture mechanics (LEFM). Using the boundary element method (BEM) and Lagrangian crack-fronts, we produce highly detailed fracture surfaces. The computational cost of the BEM is alleviated by using a low-resolution mesh and interpolating the resulting stress intensity factors when propagating the high-resolution crack-front.
Our system produces physics-based fracture surfaces with high spatial and temporal resolution, taking spatial variation of material toughness and/or strength into account. It also allows for crack initiation to be handled separately from crack propagation, which is not only more reasonable from a physics perspective, but can also be used to control the simulation.
Separating the resolution of the crack-front from the resolution of the computational mesh increases the efficiency and therefore the amount of visual detail on the resulting fracture surfaces. The BEM also allows us to re-use previously computed blocks of the system matrix.},
author = {Hahn, David and Wojtan, Christopher J},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{High-resolution brittle fracture simulation with boundary elements}},
doi = {10.1145/2766896},
volume = {34},
year = {2015},
}
@inproceedings{1634,
abstract = {Simulating the delightful dynamics of soap films, bubbles, and foams has traditionally required the use of a fully three-dimensional many-phase Navier-Stokes solver, even though their visual appearance is completely dominated by the thin liquid surface. We depart from earlier work on soap bubbles and foams by noting that their dynamics are naturally described by a Lagrangian vortex sheet model in which circulation is the primary variable. This leads us to derive a novel circulation-preserving surface-only discretization of foam dynamics driven by surface tension on a non-manifold triangle mesh. We represent the surface using a mesh-based multimaterial surface tracker which supports complex bubble topology changes, and evolve the surface according to the ambient air flow induced by a scalar circulation field stored on the mesh. Surface tension forces give rise to a simple update rule for circulation, even at non-manifold Plateau borders, based on a discrete measure of signed scalar mean curvature. We further incorporate vertex constraints to enable the interaction of soap films with wires. The result is a method that is at once simple, robust, and efficient, yet able to capture an array of soap films behaviors including foam rearrangement, catenoid collapse, blowing bubbles, and double bubbles being pulled apart.},
author = {Da, Fang and Batty, Christopher and Wojtan, Christopher J and Grinspun, Eitan},
location = {Los Angeles, CA, United States},
number = {4},
publisher = {ACM},
title = {{Double bubbles sans toil and trouble: discrete circulation-preserving vortex sheets for soap films and foams}},
doi = {10.1145/2767003},
volume = {34},
year = {2015},
}
@article{1635,
abstract = {We calculate a Ricci curvature lower bound for some classical examples of random walks, namely, a chain on a slice of the n-dimensional discrete cube (the so-called Bernoulli-Laplace model) and the random transposition shuffle of the symmetric group of permutations on n letters.},
author = {Erbar, Matthias and Maas, Jan and Tetali, Prasad},
journal = {Annales de la faculté des sciences de Toulouse},
number = {4},
pages = {781 -- 800},
publisher = {Univ. Paul Sabatier},
title = {{Discrete Ricci curvature bounds for Bernoulli-Laplace and random transposition models}},
doi = {10.5802/afst.1464},
volume = {24},
year = {2015},
}
@inproceedings{1636,
abstract = {Constraint Satisfaction Problem (CSP) is a fundamental algorithmic problem that appears in many areas of Computer Science. It can be equivalently stated as computing a homomorphism R→ΓΓ between two relational structures, e.g. between two directed graphs. Analyzing its complexity has been a prominent research direction, especially for the fixed template CSPs where the right side ΓΓ is fixed and the left side R is unconstrained.
Far fewer results are known for the hybrid setting that restricts both sides simultaneously. It assumes that R belongs to a certain class of relational structures (called a structural restriction in this paper). We study which structural restrictions are effective, i.e. there exists a fixed template ΓΓ (from a certain class of languages) for which the problem is tractable when R is restricted, and NP-hard otherwise. We provide a characterization for structural restrictions that are closed under inverse homomorphisms. The criterion is based on the chromatic number of a relational structure defined in this paper; it generalizes the standard chromatic number of a graph.
As our main tool, we use the algebraic machinery developed for fixed template CSPs. To apply it to our case, we introduce a new construction called a “lifted language”. We also give a characterization for structural restrictions corresponding to minor-closed families of graphs, extend results to certain Valued CSPs (namely conservative valued languages), and state implications for (valued) CSPs with ordered variables and for the maximum weight independent set problem on some restricted families of graphs.},
author = {Kolmogorov, Vladimir and Rolinek, Michal and Takhanov, Rustem},
location = {Nagoya, Japan},
pages = {566 -- 577},
publisher = {Springer},
title = {{Effectiveness of structural restrictions for hybrid CSPs}},
doi = {10.1007/978-3-662-48971-0_48},
volume = {9472},
year = {2015},
}
@inproceedings{1637,
abstract = {An instance of the Valued Constraint Satisfaction Problem (VCSP) is given by a finite set of variables, a finite domain of labels, and a sum of functions, each function depending on a subset of the variables. Each function can take finite values specifying costs of assignments of labels to its variables or the infinite value, which indicates an infeasible assignment. The goal is to find an assignment of labels to the variables that minimizes the sum. We study, assuming that P ≠ NP, how the complexity of this very general problem depends on the set of functions allowed in the instances, the so-called constraint language. The case when all allowed functions take values in {0, ∞} corresponds to ordinary CSPs, where one deals only with the feasibility issue and there is no optimization. This case is the subject of the Algebraic CSP Dichotomy Conjecture predicting for which constraint languages CSPs are tractable (i.e. solvable in polynomial time) and for which NP-hard. The case when all allowed functions take only finite values corresponds to finite-valued CSP, where the feasibility aspect is trivial and one deals only with the optimization issue. The complexity of finite-valued CSPs was fully classified by Thapper and Zivny. An algebraic necessary condition for tractability of a general-valued CSP with a fixed constraint language was recently given by Kozik and Ochremiak. As our main result, we prove that if a constraint language satisfies this algebraic necessary condition, and the feasibility CSP (i.e. the problem of deciding whether a given instance has a feasible solution) corresponding to the VCSP with this language is tractable, then the VCSP is tractable. The algorithm is a simple combination of the assumed algorithm for the feasibility CSP and the standard LP relaxation. As a corollary, we obtain that a dichotomy for ordinary CSPs would imply a dichotomy for general-valued CSPs.},
author = {Kolmogorov, Vladimir and Krokhin, Andrei and Rolinek, Michal},
location = {Berkeley, CA, United States},
pages = {1246 -- 1258},
publisher = {IEEE},
title = {{The complexity of general-valued CSPs}},
doi = {10.1109/FOCS.2015.80},
year = {2015},
}
@article{1638,
abstract = {The mitochondrial respiratory chain, also known as the electron transport chain (ETC), is crucial to life, and energy production in the form of ATP is the main mitochondrial function. Three proton-translocating enzymes of the ETC, namely complexes I, III and IV, generate proton motive force, which in turn drives ATP synthase (complex V). The atomic structures and basic mechanisms of most respiratory complexes have previously been established, with the exception of complex I, the largest complex in the ETC. Recently, the crystal structure of the entire complex I was solved using a bacterial enzyme. The structure provided novel insights into the core architecture of the complex, the electron transfer and proton translocation pathways, as well as the mechanism that couples these two processes.},
author = {Sazanov, Leonid A},
journal = {Nature Reviews Molecular Cell Biology},
number = {6},
pages = {375 -- 388},
publisher = {Nature Publishing Group},
title = {{A giant molecular proton pump: structure and mechanism of respiratory complex I}},
doi = {10.1038/nrm3997},
volume = {16},
year = {2015},
}
@article{1639,
abstract = {In this paper the optimal transport and the metamorphosis perspectives are combined. For a pair of given input images geodesic paths in the space of images are defined as minimizers of a resulting path energy. To this end, the underlying Riemannian metric measures the rate of transport cost and the rate of viscous dissipation. Furthermore, the model is capable to deal with strongly varying image contrast and explicitly allows for sources and sinks in the transport equations which are incorporated in the metric related to the metamorphosis approach by Trouvé and Younes. In the non-viscous case with source term existence of geodesic paths is proven in the space of measures. The proposed model is explored on the range from merely optimal transport to strongly dissipative dynamics. For this model a robust and effective variational time discretization of geodesic paths is proposed. This requires to minimize a discrete path energy consisting of a sum of consecutive image matching functionals. These functionals are defined on corresponding pairs of intensity functions and on associated pairwise matching deformations. Existence of time discrete geodesics is demonstrated. Furthermore, a finite element implementation is proposed and applied to instructive test cases and to real images. In the non-viscous case this is compared to the algorithm proposed by Benamou and Brenier including a discretization of the source term. Finally, the model is generalized to define discrete weighted barycentres with applications to textures and objects.},
author = {Maas, Jan and Rumpf, Martin and Schönlieb, Carola and Simon, Stefan},
journal = {ESAIM: Mathematical Modelling and Numerical Analysis},
number = {6},
pages = {1745 -- 1769},
publisher = {EDP Sciences},
title = {{A generalized model for optimal transport of images including dissipation and density modulation}},
doi = {10.1051/m2an/2015043},
volume = {49},
year = {2015},
}
@article{1640,
abstract = {Auxin and cytokinin are key endogenous regulators of plant development. Although cytokinin-mediated modulation of auxin distribution is a developmentally crucial hormonal interaction, its molecular basis is largely unknown. Here we show a direct regulatory link between cytokinin signalling and the auxin transport machinery uncovering a mechanistic framework for cytokinin-auxin cross-talk. We show that the CYTOKININ RESPONSE FACTORS (CRFs), transcription factors downstream of cytokinin perception, transcriptionally control genes encoding PIN-FORMED (PIN) auxin transporters at a specific PIN CYTOKININ RESPONSE ELEMENT (PCRE) domain. Removal of this cis-regulatory element effectively uncouples PIN transcription from the CRF-mediated cytokinin regulation and attenuates plant cytokinin sensitivity. We propose that CRFs represent a missing cross-talk component that fine-tunes auxin transport capacity downstream of cytokinin signalling to control plant development.},
author = {Šimášková, Mária and O'Brien, José and Khan-Djamei, Mamoona and Van Noorden, Giel and Ötvös, Krisztina and Vieten, Anne and De Clercq, Inge and Van Haperen, Johanna and Cuesta, Candela and Hoyerová, Klára and Vanneste, Steffen and Marhavy, Peter and Wabnik, Krzysztof T and Van Breusegem, Frank and Nowack, Moritz and Murphy, Angus and Friml, Jiřĺ and Weijers, Dolf and Beeckman, Tom and Benková, Eva},
journal = {Nature Communications},
publisher = {Nature Publishing Group},
title = {{Cytokinin response factors regulate PIN-FORMED auxin transporters}},
doi = {10.1038/ncomms9717},
volume = {6},
year = {2015},
}
@article{1642,
abstract = {The Hanani-Tutte theorem is a classical result proved for the first time in the 1930s that characterizes planar graphs as graphs that admit a drawing in the plane in which every pair of edges not sharing a vertex cross an even number of times. We generalize this result to clustered graphs with two disjoint clusters, and show that a straightforward extension to flat clustered graphs with three or more disjoint clusters is not possible. For general clustered graphs we show a variant of the Hanani-Tutte theorem in the case when each cluster induces a connected subgraph. Di Battista and Frati proved that clustered planarity of embedded clustered graphs whose every face is incident to at most five vertices can be tested in polynomial time. We give a new and short proof of this result, using the matroid intersection algorithm.},
author = {Fulek, Radoslav and Kynčl, Jan and Malinovič, Igor and Pálvölgyi, Dömötör},
journal = {Electronic Journal of Combinatorics},
number = {4},
publisher = {Electronic Journal of Combinatorics},
title = {{Clustered planarity testing revisited}},
volume = {22},
year = {2015},
}
@inproceedings{1644,
abstract = {Increasing the computational complexity of evaluating a hash function, both for the honest users as well as for an adversary, is a useful technique employed for example in password-based cryptographic schemes to impede brute-force attacks, and also in so-called proofs of work (used in protocols like Bitcoin) to show that a certain amount of computation was performed by a legitimate user. A natural approach to adjust the complexity of a hash function is to iterate it c times, for some parameter c, in the hope that any query to the scheme requires c evaluations of the underlying hash function. However, results by Dodis et al. (Crypto 2012) imply that plain iteration falls short of achieving this goal, and designing schemes which provably have such a desirable property remained an open problem. This paper formalizes explicitly what it means for a given scheme to amplify the query complexity of a hash function. In the random oracle model, the goal of a secure query-complexity amplifier (QCA) scheme is captured as transforming, in the sense of indifferentiability, a random oracle allowing R queries (for the adversary) into one provably allowing only r < R queries. Turned around, this means that making r queries to the scheme requires at least R queries to the actual random oracle. Second, a new scheme, called collision-free iteration, is proposed and proven to achieve c-fold QCA for both the honest parties and the adversary, for any fixed parameter c.},
author = {Demay, Grégory and Gazi, Peter and Maurer, Ueli and Tackmann, Björn},
location = {Lugano, Switzerland},
pages = {159 -- 180},
publisher = {Springer},
title = {{Query-complexity amplification for random oracles}},
doi = {10.1007/978-3-319-17470-9_10},
volume = {9063},
year = {2015},
}
@inproceedings{1645,
abstract = {Secret-key constructions are often proved secure in a model where one or more underlying components are replaced by an idealized oracle accessible to the attacker. This model gives rise to information-theoretic security analyses, and several advances have been made in this area over the last few years. This paper provides a systematic overview of what is achievable in this model, and how existing works fit into this view.},
author = {Gazi, Peter and Tessaro, Stefano},
booktitle = {2015 IEEE Information Theory Workshop},
location = {Jerusalem, Israel},
publisher = {IEEE},
title = {{Secret-key cryptography from ideal primitives: A systematic verview}},
doi = {10.1109/ITW.2015.7133163},
year = {2015},
}
@inproceedings{1646,
abstract = {A pseudorandom function (PRF) is a keyed function F : K × X → Y where, for a random key k ∈ K, the function F(k, ·) is indistinguishable from a uniformly random function, given black-box access. A key-homomorphic PRF has the additional feature that for any keys k, k' and any input x, we have F(k+k', x) = F(k, x)⊕F(k', x) for some group operations +,⊕ on K and Y, respectively. A constrained PRF for a family of setsS ⊆ P(X) has the property that, given any key k and set S ∈ S, one can efficiently compute a “constrained” key kS that enables evaluation of F(k, x) on all inputs x ∈ S, while the values F(k, x) for x /∈ S remain pseudorandom even given kS. In this paper we construct PRFs that are simultaneously constrained and key homomorphic, where the homomorphic property holds even for constrained keys. We first show that the multilinear map-based bit-fixing and circuit-constrained PRFs of Boneh and Waters (Asiacrypt 2013) can be modified to also be keyhomomorphic. We then show that the LWE-based key-homomorphic PRFs of Banerjee and Peikert (Crypto 2014) are essentially already prefix-constrained PRFs, using a (non-obvious) definition of constrained keys and associated group operation. Moreover, the constrained keys themselves are pseudorandom, and the constraining and evaluation functions can all be computed in low depth. As an application of key-homomorphic constrained PRFs,we construct a proxy re-encryption schemewith fine-grained access control. This scheme allows storing encrypted data on an untrusted server, where each file can be encrypted relative to some attributes, so that only parties whose constrained keys match the attributes can decrypt. Moreover, the server can re-key (arbitrary subsets of) the ciphertexts without learning anything about the plaintexts, thus permitting efficient and finegrained revocation.},
author = {Banerjee, Abishek and Fuchsbauer, Georg and Peikert, Chris and Pietrzak, Krzysztof Z and Stevens, Sophie},
location = {Warsaw, Poland},
pages = {31 -- 60},
publisher = {Springer},
title = {{Key-homomorphic constrained pseudorandom functions}},
doi = {10.1007/978-3-662-46497-7_2},
volume = {9015},
year = {2015},
}
@inproceedings{1647,
abstract = {Round-optimal blind signatures are notoriously hard to construct in the standard model, especially in the malicious-signer model, where blindness must hold under adversarially chosen keys. This is substantiated by several impossibility results. The only construction that can be termed theoretically efficient, by Garg and Gupta (Eurocrypt’14), requires complexity leveraging, inducing an exponential security loss. We present a construction of practically efficient round-optimal blind signatures in the standard model. It is conceptually simple and builds on the recent structure-preserving signatures on equivalence classes (SPSEQ) from Asiacrypt’14. While the traditional notion of blindness follows from standard assumptions, we prove blindness under adversarially chosen keys under an interactive variant of DDH. However, we neither require non-uniform assumptions nor complexity leveraging. We then show how to extend our construction to partially blind signatures and to blind signatures on message vectors, which yield a construction of one-show anonymous credentials à la “anonymous credentials light” (CCS’13) in the standard model. Furthermore, we give the first SPS-EQ construction under noninteractive assumptions and show how SPS-EQ schemes imply conventional structure-preserving signatures, which allows us to apply optimality results for the latter to SPS-EQ.},
author = {Fuchsbauer, Georg and Hanser, Christian and Slamanig, Daniel},
location = {Santa Barbara, CA, United States},
pages = {233 -- 253},
publisher = {Springer},
title = {{Practical round-optimal blind signatures in the standard model}},
doi = {10.1007/978-3-662-48000-7_12},
volume = {9216},
year = {2015},
}
@inproceedings{1648,
abstract = {Generalized Selective Decryption (GSD), introduced by Panjwani [TCC’07], is a game for a symmetric encryption scheme Enc that captures the difficulty of proving adaptive security of certain protocols, most notably the Logical Key Hierarchy (LKH) multicast encryption protocol. In the GSD game there are n keys k1,..., kn, which the adversary may adaptively corrupt (learn); moreover, it can ask for encryptions Encki (kj) of keys under other keys. The adversary’s task is to distinguish keys (which it cannot trivially compute) from random. Proving the hardness of GSD assuming only IND-CPA security of Enc is surprisingly hard. Using “complexity leveraging” loses a factor exponential in n, which makes the proof practically meaningless. We can think of the GSD game as building a graph on n vertices, where we add an edge i → j when the adversary asks for an encryption of kj under ki. If restricted to graphs of depth ℓ, Panjwani gave a reduction that loses only a factor exponential in ℓ (not n). To date, this is the only non-trivial result known for GSD. In this paper we give almost-polynomial reductions for large classes of graphs. Most importantly, we prove the security of the GSD game restricted to trees losing only a quasi-polynomial factor n3 log n+5. Trees are an important special case capturing real-world protocols like the LKH protocol. Our new bound improves upon Panjwani’s on some LKH variants proposed in the literature where the underlying tree is not balanced. Our proof builds on ideas from the “nested hybrids” technique recently introduced by Fuchsbauer et al. [Asiacrypt’14] for proving the adaptive security of constrained PRFs.},
author = {Fuchsbauer, Georg and Jafargholi, Zahra and Pietrzak, Krzysztof Z},
location = {Santa Barbara, CA, USA},
pages = {601 -- 620},
publisher = {Springer},
title = {{A quasipolynomial reduction for generalized selective decryption on trees}},
doi = {10.1007/978-3-662-47989-6_29},
volume = {9215},
year = {2015},
}
@inproceedings{1649,
abstract = {We extend a commitment scheme based on the learning with errors over rings (RLWE) problem, and present efficient companion zeroknowledge proofs of knowledge. Our scheme maps elements from the ring (or equivalently, n elements from },
author = {Benhamouda, Fabrice and Krenn, Stephan and Lyubashevsky, Vadim and Pietrzak, Krzysztof Z},
location = {Vienna, Austria},
pages = {305 -- 325},
publisher = {Springer},
title = {{Efficient zero-knowledge proofs for commitments from learning with errors over rings}},
doi = {10.1007/978-3-319-24174-6_16},
volume = {9326},
year = {2015},
}
@inproceedings{1650,
abstract = {We consider the task of deriving a key with high HILL entropy (i.e., being computationally indistinguishable from a key with high min-entropy) from an unpredictable source.
Previous to this work, the only known way to transform unpredictability into a key that was ϵ indistinguishable from having min-entropy was via pseudorandomness, for example by Goldreich-Levin (GL) hardcore bits. This approach has the inherent limitation that from a source with k bits of unpredictability entropy one can derive a key of length (and thus HILL entropy) at most k−2log(1/ϵ) bits. In many settings, e.g. when dealing with biometric data, such a 2log(1/ϵ) bit entropy loss in not an option. Our main technical contribution is a theorem that states that in the high entropy regime, unpredictability implies HILL entropy. Concretely, any variable K with |K|−d bits of unpredictability entropy has the same amount of so called metric entropy (against real-valued, deterministic distinguishers), which is known to imply the same amount of HILL entropy. The loss in circuit size in this argument is exponential in the entropy gap d, and thus this result only applies for small d (i.e., where the size of distinguishers considered is exponential in d).
To overcome the above restriction, we investigate if it’s possible to first “condense” unpredictability entropy and make the entropy gap small. We show that any source with k bits of unpredictability can be condensed into a source of length k with k−3 bits of unpredictability entropy. Our condenser simply “abuses" the GL construction and derives a k bit key from a source with k bits of unpredicatibily. The original GL theorem implies nothing when extracting that many bits, but we show that in this regime, GL still behaves like a “condenser" for unpredictability. This result comes with two caveats (1) the loss in circuit size is exponential in k and (2) we require that the source we start with has no HILL entropy (equivalently, one can efficiently check if a guess is correct). We leave it as an intriguing open problem to overcome these restrictions or to prove they’re inherent.},
author = {Skórski, Maciej and Golovnev, Alexander and Pietrzak, Krzysztof Z},
location = {Kyoto, Japan},
pages = {1046 -- 1057},
publisher = {Springer},
title = {{Condensed unpredictability }},
doi = {10.1007/978-3-662-47672-7_85},
volume = {9134},
year = {2015},
}
@inproceedings{1651,
abstract = {Cryptographic e-cash allows off-line electronic transactions between a bank, users and merchants in a secure and anonymous fashion. A plethora of e-cash constructions has been proposed in the literature; however, these traditional e-cash schemes only allow coins to be transferred once between users and merchants. Ideally, we would like users to be able to transfer coins between each other multiple times before deposit, as happens with physical cash. “Transferable” e-cash schemes are the solution to this problem. Unfortunately, the currently proposed schemes are either completely impractical or do not achieve the desirable anonymity properties without compromises, such as assuming the existence of a trusted “judge” who can trace all coins and users in the system. This paper presents the first efficient and fully anonymous transferable e-cash scheme without any trusted third parties. We start by revising the security and anonymity properties of transferable e-cash to capture issues that were previously overlooked. For our construction we use the recently proposed malleable signatures by Chase et al. to allow the secure and anonymous transfer of coins, combined with a new efficient double-spending detection mechanism. Finally, we discuss an instantiation of our construction.},
author = {Baldimtsi, Foteini and Chase, Melissa and Fuchsbauer, Georg and Kohlweiss, Markulf},
location = {Gaithersburg, MD, USA},
pages = {101 -- 124},
publisher = {Springer},
title = {{Anonymous transferable e-cash}},
doi = {10.1007/978-3-662-46447-2_5},
volume = {9020},
year = {2015},
}
@inproceedings{1652,
abstract = {We develop new theoretical tools for proving lower-bounds on the (amortized) complexity of certain functions in models of parallel computation. We apply the tools to construct a class of functions with high amortized memory complexity in the parallel Random Oracle Model (pROM); a variant of the standard ROM allowing for batches of simultaneous queries. In particular we obtain a new, more robust, type of Memory-Hard Functions (MHF); a security primitive which has recently been gaining acceptance in practice as an effective means of countering brute-force attacks on security relevant functions. Along the way we also demonstrate an important shortcoming of previous definitions of MHFs and give a new definition addressing the problem. The tools we develop represent an adaptation of the powerful pebbling paradigm (initially introduced by Hewitt and Paterson [HP70] and Cook [Coo73]) to a simple and intuitive parallel setting. We define a simple pebbling game Gp over graphs which aims to abstract parallel computation in an intuitive way. As a conceptual contribution we define a measure of pebbling complexity for graphs called cumulative complexity (CC) and show how it overcomes a crucial shortcoming (in the parallel setting) exhibited by more traditional complexity measures used in the past. As a main technical contribution we give an explicit construction of a constant in-degree family of graphs whose CC in Gp approaches maximality to within a polylogarithmic factor for any graph of equal size (analogous to the graphs of Tarjan et. al. [PTC76, LT82] for sequential pebbling games). Finally, for a given graph G and related function fG, we derive a lower-bound on the amortized memory complexity of fG in the pROM in terms of the CC of G in the game Gp.},
author = {Alwen, Joel F and Serbinenko, Vladimir},
booktitle = {Proceedings of the 47th annual ACM symposium on Theory of computing},
location = {Portland, OR, United States},
pages = {595 -- 603},
publisher = {ACM},
title = {{High parallel complexity graphs and memory-hard functions}},
doi = {10.1145/2746539.2746622},
year = {2015},
}
@inproceedings{1654,
abstract = {HMAC and its variant NMAC are the most popular approaches to deriving a MAC (and more generally, a PRF) from a cryptographic hash function. Despite nearly two decades of research, their exact security still remains far from understood in many different contexts. Indeed, recent works have re-surfaced interest for {\em generic} attacks, i.e., attacks that treat the compression function of the underlying hash function as a black box.
Generic security can be proved in a model where the underlying compression function is modeled as a random function -- yet, to date, the question of proving tight, non-trivial bounds on the generic security of HMAC/NMAC even as a PRF remains a challenging open question.
In this paper, we ask the question of whether a small modification to HMAC and NMAC can allow us to exactly characterize the security of the resulting constructions, while only incurring little penalty with respect to efficiency. To this end, we present simple variants of NMAC and HMAC, for which we prove tight bounds on the generic PRF security, expressed in terms of numbers of construction and compression function queries necessary to break the construction. All of our constructions are obtained via a (near) {\em black-box} modification of NMAC and HMAC, which can be interpreted as an initial step of key-dependent message pre-processing.
While our focus is on PRF security, a further attractive feature of our new constructions is that they clearly defeat all recent generic attacks against properties such as state recovery and universal forgery. These exploit properties of the so-called ``functional graph'' which are not directly accessible in our new constructions. },
author = {Gazi, Peter and Pietrzak, Krzysztof Z and Tessaro, Stefano},
location = {Auckland, New Zealand},
pages = {85 -- 109},
publisher = {Springer},
title = {{Generic security of NMAC and HMAC with input whitening}},
doi = {10.1007/978-3-662-48800-3_4},
volume = {9453},
year = {2015},
}
@article{1655,
abstract = {Quantifying behaviors of robots which were generated autonomously from task-independent objective functions is an important prerequisite for objective comparisons of algorithms and movements of animals. The temporal sequence of such a behavior can be considered as a time series and hence complexity measures developed for time series are natural candidates for its quantification. The predictive information and the excess entropy are such complexity measures. They measure the amount of information the past contains about the future and thus quantify the nonrandom structure in the temporal sequence. However, when using these measures for systems with continuous states one has to deal with the fact that their values will depend on the resolution with which the systems states are observed. For deterministic systems both measures will diverge with increasing resolution. We therefore propose a new decomposition of the excess entropy in resolution dependent and resolution independent parts and discuss how they depend on the dimensionality of the dynamics, correlations and the noise level. For the practical estimation we propose to use estimates based on the correlation integral instead of the direct estimation of the mutual information based on next neighbor statistics because the latter allows less control of the scale dependencies. Using our algorithm we are able to show how autonomous learning generates behavior of increasing complexity with increasing learning duration.},
author = {Martius, Georg S and Olbrich, Eckehard},
journal = {Entropy},
number = {10},
pages = {7266 -- 7297},
publisher = {Multidisciplinary Digital Publishing Institute},
title = {{Quantifying emergent behavior of autonomous robots}},
doi = {10.3390/e17107266},
volume = {17},
year = {2015},
}