@article{14341, abstract = {Flows through pipes and channels are, in practice, almost always turbulent, and the multiscale eddying motion is responsible for a major part of the encountered friction losses and pumping costs1. Conversely, for pulsatile flows, in particular for aortic blood flow, turbulence levels remain low despite relatively large peak velocities. For aortic blood flow, high turbulence levels are intolerable as they would damage the shear-sensitive endothelial cell layer2,3,4,5. Here we show that turbulence in ordinary pipe flow is diminished if the flow is driven in a pulsatile mode that incorporates all the key features of the cardiac waveform. At Reynolds numbers comparable to those of aortic blood flow, turbulence is largely inhibited, whereas at much higher speeds, the turbulent drag is reduced by more than 25%. This specific operation mode is more efficient when compared with steady driving, which is the present situation for virtually all fluid transport processes ranging from heating circuits to water, gas and oil pipelines.}, author = {Scarselli, Davide and Lopez Alonso, Jose M and Varshney, Atul and Hof, Björn}, issn = {1476-4687}, journal = {Nature}, number = {7977}, pages = {71--74}, publisher = {Springer Nature}, title = {{Turbulence suppression by cardiac-cycle-inspired driving of pipe flow}}, doi = {10.1038/s41586-023-06399-5}, volume = {621}, year = {2023}, } @article{12134, abstract = {Standard epidemic models exhibit one continuous, second order phase transition to macroscopic outbreaks. However, interventions to control outbreaks may fundamentally alter epidemic dynamics. Here we reveal how such interventions modify the type of phase transition. In particular, we uncover three distinct types of explosive phase transitions for epidemic dynamics with capacity-limited interventions. Depending on the capacity limit, interventions may (i) leave the standard second order phase transition unchanged but exponentially suppress the probability of large outbreaks, (ii) induce a first-order discontinuous transition to macroscopic outbreaks, or (iii) cause a secondary explosive yet continuous third-order transition. These insights highlight inherent limitations in predicting and containing epidemic outbreaks. More generally our study offers a cornerstone example of a third-order explosive phase transition in complex systems.}, author = {Börner, Georg and Schröder, Malte and Scarselli, Davide and Budanur, Nazmi B and Hof, Björn and Timme, Marc}, issn = {2632-072X}, journal = {Journal of Physics: Complexity}, keywords = {Artificial Intelligence, Computer Networks and Communications, Computer Science Applications, Information Systems}, number = {4}, publisher = {IOP Publishing}, title = {{Explosive transitions in epidemic dynamics}}, doi = {10.1088/2632-072x/ac99cd}, volume = {3}, year = {2022}, } @article{9407, abstract = {High impact epidemics constitute one of the largest threats humanity is facing in the 21st century. In the absence of pharmaceutical interventions, physical distancing together with testing, contact tracing and quarantining are crucial in slowing down epidemic dynamics. Yet, here we show that if testing capacities are limited, containment may fail dramatically because such combined countermeasures drastically change the rules of the epidemic transition: Instead of continuous, the response to countermeasures becomes discontinuous. Rather than following the conventional exponential growth, the outbreak that is initially strongly suppressed eventually accelerates and scales faster than exponential during an explosive growth period. As a consequence, containment measures either suffice to stop the outbreak at low total case numbers or fail catastrophically if marginally too weak, thus implying large uncertainties in reliably estimating overall epidemic dynamics, both during initial phases and during second wave scenarios.}, author = {Scarselli, Davide and Budanur, Nazmi B and Timme, Marc and Hof, Björn}, issn = {20411723}, journal = {Nature Communications}, number = {1}, publisher = {Springer Nature}, title = {{Discontinuous epidemic transition due to limited testing}}, doi = {10.1038/s41467-021-22725-9}, volume = {12}, year = {2021}, } @phdthesis{7258, abstract = {Many flows encountered in nature and applications are characterized by a chaotic motion known as turbulence. Turbulent flows generate intense friction with pipe walls and are responsible for considerable amounts of energy losses at world scale. The nature of turbulent friction and techniques aimed at reducing it have been subject of extensive research over the last century, but no definite answer has been found yet. In this thesis we show that in pipes at moderate turbulent Reynolds numbers friction is better described by the power law first introduced by Blasius and not by the Prandtl–von Kármán formula. At higher Reynolds numbers, large scale motions gradually become more important in the flow and can be related to the change in scaling of friction. Next, we present a series of new techniques that can relaminarize turbulence by suppressing a key mechanism that regenerates it at walls, the lift–up effect. In addition, we investigate the process of turbulence decay in several experiments and discuss the drag reduction potential. Finally, we examine the behavior of friction under pulsating conditions inspired by the human heart cycle and we show that under such circumstances turbulent friction can be reduced to produce energy savings.}, author = {Scarselli, Davide}, issn = {2663-337X}, pages = {174}, publisher = {Institute of Science and Technology Austria}, title = {{New approaches to reduce friction in turbulent pipe flow}}, doi = {10.15479/AT:ISTA:7258}, year = {2020}, } @article{6486, abstract = {Based on a novel control scheme, where a steady modification of the streamwise velocity profile leads to complete relaminarization of initially fully turbulent pipe flow, we investigate the applicability and usefulness of custom-shaped honeycombs for such control. The custom-shaped honeycombs are used as stationary flow management devices which generate specific modifications of the streamwise velocity profile. Stereoscopic particle image velocimetry and pressure drop measurements are used to investigate and capture the development of the relaminarizing flow downstream these devices. We compare the performance of straight (constant length across the radius of the pipe) honeycombs with custom-shaped ones (variable length across the radius) and try to determine the optimal shape for maximal relaminarization at minimal pressure loss. The optimally modified streamwise velocity profile is found to be M-shaped, and the maximum attainable Reynolds number for total relaminarization is found to be of the order of 10,000. Consequently, the respective reduction in skin friction downstream of the device is almost by a factor of 5. The break-even point, where the additional pressure drop caused by the device is balanced by the savings due to relaminarization and a net gain is obtained, corresponds to a downstream stretch of distances as low as approximately 100 pipe diameters of laminar flow.}, author = {Kühnen, Jakob and Scarselli, Davide and Hof, Björn}, issn = {1528901X}, journal = {Journal of Fluids Engineering}, number = {11}, publisher = {ASME}, title = {{Relaminarization of pipe flow by means of 3D-printed shaped honeycombs}}, doi = {10.1115/1.4043494}, volume = {141}, year = {2019}, } @article{6228, abstract = {Following the recent observation that turbulent pipe flow can be relaminarised bya relatively simple modification of the mean velocity profile, we here carry out aquantitative experimental investigation of this phenomenon. Our study confirms thata flat velocity profile leads to a collapse of turbulence and in order to achieve theblunted profile shape, we employ a moving pipe segment that is briefly and rapidlyshifted in the streamwise direction. The relaminarisation threshold and the minimumshift length and speeds are determined as a function of Reynolds number. Althoughturbulence is still active after the acceleration phase, the modulated profile possessesa severely decreased lift-up potential as measured by transient growth. As shown,this results in an exponential decay of fluctuations and the flow relaminarises. Whilethis method can be easily applied at low to moderate flow speeds, the minimumstreamwise length over which the acceleration needs to act increases linearly with theReynolds number.}, author = {Scarselli, Davide and Kühnen, Jakob and Hof, Björn}, issn = {14697645}, journal = {Journal of Fluid Mechanics}, pages = {934--948}, publisher = {Cambridge University Press}, title = {{Relaminarising pipe flow by wall movement}}, doi = {10.1017/jfm.2019.191}, volume = {867}, year = {2019}, } @article{422, abstract = {We show that a rather simple, steady modification of the streamwise velocity profile in a pipe can lead to a complete collapse of turbulence and the flow fully relaminarizes. Two different devices, a stationary obstacle (inset) and a device which injects fluid through an annular gap close to the wall, are used to control the flow. Both devices modify the streamwise velocity profile such that the flow in the center of the pipe is decelerated and the flow in the near wall region is accelerated. We present measurements with stereoscopic particle image velocimetry to investigate and capture the development of the relaminarizing flow downstream these devices and the specific circumstances responsible for relaminarization. We find total relaminarization up to Reynolds numbers of 6000, where the skin friction in the far downstream distance is reduced by a factor of 3.4 due to relaminarization. In a smooth straight pipe the flow remains completely laminar downstream of the control. Furthermore, we show that transient (temporary) relaminarization in a spatially confined region right downstream the devices occurs also at much higher Reynolds numbers, accompanied by a significant local skin friction drag reduction. The underlying physical mechanism of relaminarization is attributed to a weakening of the near-wall turbulence production cycle.}, author = {Kühnen, Jakob and Scarselli, Davide and Schaner, Markus and Hof, Björn}, journal = {Flow Turbulence and Combustion}, number = {4}, pages = {919 -- 942}, publisher = {Springer}, title = {{Relaminarization by steady modification of the streamwise velocity profile in a pipe}}, doi = {10.1007/s10494-018-9896-4}, volume = {100}, year = {2018}, } @article{461, abstract = {Turbulence is the major cause of friction losses in transport processes and it is responsible for a drastic drag increase in flows over bounding surfaces. While much effort is invested into developing ways to control and reduce turbulence intensities, so far no methods exist to altogether eliminate turbulence if velocities are sufficiently large. We demonstrate for pipe flow that appropriate distortions to the velocity profile lead to a complete collapse of turbulence and subsequently friction losses are reduced by as much as 90%. Counterintuitively, the return to laminar motion is accomplished by initially increasing turbulence intensities or by transiently amplifying wall shear. Since neither the Reynolds number nor the shear stresses decrease (the latter often increase), these measures are not indicative of turbulence collapse. Instead, an amplification mechanism measuring the interaction between eddies and the mean shear is found to set a threshold below which turbulence is suppressed beyond recovery.}, author = {Kühnen, Jakob and Song, Baofang and Scarselli, Davide and Budanur, Nazmi B and Riedl, Michael and Willis, Ashley and Avila, Marc and Hof, Björn}, journal = {Nature Physics}, pages = {386--390}, publisher = {Nature Publishing Group}, title = {{Destabilizing turbulence in pipe flow}}, doi = {10.1038/s41567-017-0018-3}, volume = {14}, year = {2018}, }